If > the line has text, the symbol is at the end of the line. If there is no text, > it's on the left.

In any Office application, you can launch the Symbol dialog box from a toolbar by adding the Symbol command to a toolbar as follows: From the Tools menu, choose Customize. Click the Commands tab. Microsoft Word includes formatting options that allow you to view all types of normally invisible marks, such as spaces, tabs and paragraphs. For instance, instead of having a blank space in place.

This will add a new button to your toolbar: an “a” with two dots above it. You only have to do this once. To add a symbol, click the accent button. A drop down menu will show you different options using boxes to indicate that they apply for any letter. Choose the option you want. When you click on that box, a little field appears in your document and the Equation ribbon becomes active.

Below are some example scenarios. Windows Office • Asian Layout – In Office 2013, many Asian Layout options are under the Layout tab, then Text Direction. • Right to Left (RTL) Alignment – The buttons to set paragraphs to are in the Layout tab.

• On the right side of the ribbon, click, and then click Customize Ribbon Tab Order. • On the tab, click. • Click Done. Show hidden tabs • On the right side of the ribbon, click, and then click Ribbon Preferences.

How do I reverse hiding the Windows taskbar? To show the Windows taskbar, move the mouse to the bottom of the screen (assuming your Windows task bar is usually there), at which point it should appear. Then right-click at the bottom of the screen and select Properties, then untick Auto-hide the taskbar. ——————— This is part of my on how to avoid time-consuming “short cuts” and use Word in the right way to maximise your time and improve the look of your documents. If you’ve enjoyed the post or found it useful, please use the sharing buttons below to share it via your social media networks – thank you! Please note, these hints work with versions of Microsoft Word currently in use – Word 2007, Word 2010 and Word 2013 for PC.

Add or remove buttons or commands from a toolbar or the menu bar • On the View menu, point to Toolbars, and then click Customize Toolbars and Menus. • Click the Toolbars and Menus tab. • Select the Show check box for the toolbar that you want to change. • Click the Commands tab. • Under Categories, click a category. • Do one of the following: To Do this Add a command to a toolbar or the menu bar Under Commands, drag a command from the Commands list to where you want to add it to the toolbar or the menu bar.

No, you will waste your life trying to get the computer to do what typewriters did just fine – “I need to type a document, I scroll a piece of paper into the typewriter, I type what I need, pull out the paper and walk away, onto other things.” Instead, it’s open WORD and – SURPRISE! Little marks on your paper that won’t go away and YOU DIDN’T WANT THEM THERE TO BEGIN WITH. Same thing with looking up things on Youtube. “You will watch this stupid commercial for something you haven’t the slightest interest in buying.” SIGH SIGH SIGH SIGH SIGH 8:30 AM and I’m already angry. I understand perfectly. The Pilcrow is our friend but can also be our worse enemy.

How many sheer hours, days, weeks, months do we spend trying to get these stupid machines to just WORK – WHY does WORD assume I want these little markings? Who uses them, and why? WHY WHY WHY WHY must anyone who tries to use a computer be required not to edit their photos, not to type a document, not to use various apps, but instead to waste their lives TRYING TO FIGURE OUT WHAT THE FUCK IS WRONG AND JUST FIX IT. Instead of googling “Funny marks on word,” coming here, going down the list and the MARKS ARE STILL THERE, and finally you say to yourself, “Ok, the document has to be written and printed, so i guess I HAVE to have these marks.” 20 minutes of your life wasted – AGAIN.

• Tell us some more • Upload in Progress • Upload failed. Please upload a file larger than 100x100 pixels • We are experiencing some problems, please try again. • You can only upload files of type PNG, JPG, or JPEG.

On the Symbol pop up window, click AutoCorrect. Type a word in the Replace This field. You can use whatever text you want (as long as it is not a real word or letter combination that you would use) to create the AutoCorrect entry. Then in the Replace With field, paste the symbol you had copied.

You can find a helpful list of shortcuts to create these characters here (which work in other versions of Office than just the referenced 2007):. Add Shortcut for Symbols to Your Quick Access Toolbar If you need to add symbols to your documents regularly, you might find it helpful to add a shortcut button to your Quick Access Toolbar. Move your mouse to the Quick Access toolbar at the top of your screen (either just above or below the ribbon). Right mouse click and choose Customize Quick Access Toolbar. Change the Choose Commands From dropdown from Popular Commands to All Commands. Scroll down in the list to Accent and double click it to add it to your Quick Access Toolbar.

Remove the paragraph symbols in Word by modifying the formatting marks options.

Once the keyboard shortcut is set up (or you learn the already established shortcut), you just type that combination at any time in your document and the symbol will be inserted. Note that most numbers in keyboard combinations are intended for the numeric keypad on the right side of your keyboard, not the numbers along the top. Special Characters The second tab is Special Characters, which shows you a list of some of the most common symbols that people use every day and their keyboard shortcuts.

When you are finished, uncheck the rest of the tabs that you no longer need and click OK. Your end result is your own tab with the commands you need, all named the way you want them. Use Icons Over Text If you are a visual thinker or simply prefer icons to text in your ribbon, you can easily make this happen. Although you cannot hide the text from the commands within the main tabs, you can do it for groups that you create containing commands. For example, if you are using PowerPoint, create a New Group, whether it is within a new tab or an existing one, by clicking the appropriate buttons from the bottom to set this up. Then, add the commands you would like to the group and rename and rearrange them as you like.

• Click the Commands tab. • From the left pane, click Insert. • In the right pane, scroll down a bit until you find the Symbol command. • Drag this option to any toolbar.

Also, they never print out. >>>>> >>>>> 'Peter T. Daniels' wrote: Stefan Blom, 12:05 น.

• On the right side of the ribbon, click, and then click Customize Ribbon Tab Order. • On the tab, click.

Microsoft Word includes formatting options that allow you to view all types of normally invisible marks, such as spaces, tabs and paragraphs. For instance, instead of having a blank space in place of a new paragraph, a 'P' symbol appears in place of paragraph breaks.

• Click Done. Show hidden tabs • On the right side of the ribbon, click, and then click Ribbon Preferences. • Under Customize, select the check box for the tab that you want to show. Reset the ribbon tab order to default settings • On the right side of the ribbon, click, and then click Customize Ribbon Tab Order. • Click Reset. Hide or show group titles in the ribbon Hiding group titles gives you more space to work with. • On the right side of the ribbon, click, and then click Ribbon Preferences.

Mac compatible versions of Word should have similar options. Always save a copy of your document before manipulating it. I bear no responsibility for any pickles you might get yourself into! Other useful posts on this blog Find all the short cuts and see the full resource guide. Free light plot drawing program for mac.

• To save your changes, click OK. Word for Mac OS X • From the Word menu, select Preferences. • Select View. • In the section titled 'Nonprinting characters', check or uncheck the appropriate boxes to view the marks of your choice. Check All to see all formatting marks. • To save your changes, click OK.

Here are a few examples of how efficient and effective you can make your ribbon. Rearrange the Tabs Using the arrows or the context menu in the Customize the Ribbon section, you can quickly move items up and down to determine their placement in the ribbon.

Type 248 from your keyboard numeric section. ( Alt + 248) Type degree symbol on Mac OS You can type degree symbol on the mac using the keyboard shortcut (Option + Shift +8) 1. Hold down the Option and Shift key and press the 8 key from your keyboard. Release all keys. Then you will see degree symbol.

What to do under those auspicious situations? I may or may not have an answer for you. But try we may, and perhaps, God willing we’ll see the last of Pilcrow. That damning gnome from the depth of the deepest hard drive.

Those strange ¶ symbols are called pilcrow signs or paragraph signs and they show the end of paragraphs. They’re useful to see when you’re formatting and editing e-books and don’t print at all, but could be distracting.

Click on New, and then enter a name for your toolbar. (Don’t click OK yet.

• Under Show, select the check box for the toolbar that contains the button or menu command that you want to change. • Under Dock, clear the check box for the toolbar that contains the button or menu command that you want to change.

It is true, sometimes we must simply accept reality for what it is, cruel, unexpected, and incomprehensible. We live in a world where it is impossible to get away from the ordinary and extraordinary frustrations of ordinary experiences. MS Word is meant to test our God given patience. The kind of virtue that most of us possess but few can master. Where is this trial and tribulation going to take us is anyone’s guess, we need only to see what it represents: a supernatural plan that stares us in the eyes everyday till the end of days. The long, bony, cold fingers are on our pulse following the rhythm of our insoluble emotions. Wisdom, passion, action, have little use under these obsessive circumstances.

If you’re trying to write, write, write, you might want to remove all distractions. If you’re displaying Word on a large screen using a projector, there are many reasons why a plain screen with no additional information might be useful. In fact, the second reason, wishing to display just some text and images via an overhead projector, is why I was asked to write this article in the first place. How to hide taskbars and toolbars in Word This works for Word 2007, 2010 and 2013: I’ve used Word 2010 in the example because it’s what I use most of the time, but the principles remain the same.

I don't have such a toolbar on my Word 2003 either--although it sounds quite useful!--so it may be a custom one. In any case, to add symbols or make changes, you'll need to have the items you want to add accessible for a toolbar. The simplest way to do this would be to create autotext entries for each one (Insert Autotext, New.).

While you are in that equation box, you can include any special characters from the ribbon. To remove that letter if you changed your mind, click your cursor immediately after the character, press backspace – the field will become highlighted. Press backspace again to delete it. Using this method allows you to create any combination of special characters you wish. Field Codes Microsoft Word allows you to enter symbols with field codes, which will prevent the software from changing your symbol, even if you change the font for the paragraph you are in.

How do I reverse hiding the Windows taskbar? To show the Windows taskbar, move the mouse to the bottom of the screen (assuming your Windows task bar is usually there), at which point it should appear. Then right-click at the bottom of the screen and select Properties, then untick Auto-hide the taskbar. ——————— This is part of my on how to avoid time-consuming “short cuts” and use Word in the right way to maximise your time and improve the look of your documents. If you’ve enjoyed the post or found it useful, please use the sharing buttons below to share it via your social media networks – thank you! Please note, these hints work with versions of Microsoft Word currently in use – Word 2007, Word 2010 and Word 2013 for PC.

Updated: by Computer Hope The show all feature in Microsoft Word allows you to see each of the, such as spaces, new lines, tabs, and new paragraphs in Microsoft Word. Above is an image of the icon used to enable and disable this feature (looks like a backwards 'P') and some example text with each of the major formatting symbols. To enable or disable this feature, press the Show All, or pilcrow, icon on the standard toolbar. If this toolbar is not visible, click View, Toolbars, and check Standard. In Microsoft Word 2007 and later, the Show All icon is found on the Home tab.

Once this dialog is opened, a special menu is accessible when you right-click on any button of the toolbars displayed in the program (NOT in the dialog box). Right-click with the mouse on the toolbar button ' email'. A menu opens, select ' Paste Button Image'. Close the dialog box 'Customize'. The button image has been customized ( ): 9. If you want to practice, do the same by replacing the ' Research' Word button image by the ' search_16.ico' icon from IconBuffet.